24″ Surgical Displays

Back To Category >

The 24″ DBIS4S surgical LCD provides a superior solution to fit all stringent surgical imaging requirements. With full HD resolution, ultra high brightness and contrast, this is the monitor of choice for the OR and ER. The DBI24S delivers bold, vibrant images even when viewed from a distance. The DBI24S supports a variety of video inputs for existing and new camera technologies, eliminates costly signal conversion, image degradation and image lag. This surgical display feature exceptionally fast response time necessary when viewing live video or motion.



LCD size/type 24″ Diagonal/a-si TFT LCD
Pixel dimension 1920 x 1200
Response time 6 ms Gray-Gray Typical
Aspect ratio True 16:9
Brightness 400 cd/m2
View Angle 178º (left/Right)/170º (Up/Down)
Contrast Ratio 1000:1
Operating Temps 32-95°F
Color/ Color Gamut 16.8 million/102% of NTSC
Mounting VESA 100 x 100mm or VESA 200 x 100mm
Dimension (w*h*d) 22.9″ x 15.9″ x 3.8″ Without Base
Weight w/o base 17.2 lbs.
Diagnostic View Modes DICOM, DICOM-Clear, DICOM-Blue, Light Box, Text, User
Power Source 100-240V/50-60 Hz
Power Consumption Less than 100W; Less than 2.5W during Power save
Power Connector 5-pin Socket w/locking
Power Requirements DC24V@6.25A, AC100-240 +/-10%, 50/60Hz
Supported Resoltutions Composite, S-Video, HDTV (1080i/720p/480p/480i), HD-SDI
Input Connectivity DVI – DVI-I 29 Pin x 1 (DVI-A/DVI-D)
VGA – D-Sub 15-pin mini x 1 (RGB Analog)
Composite – BNC x 1
S-Video – 4-pin DIN(x1)
RGBS/YPbPr – BNC x 5
3G-SDI – BNC x 1
Output Connectivity: 3G-SDI – BNC x 1
Serial Remote – RS232, 9-pin DIN
Regulatory Approvals cTÜVus (ANSI/AAMI ES 60601-1, CAN/CSA C22.2 No.60601-1), CB (IEC 60601-1), TUV/RH (EN 60601-1),FCC, BSMI, CCC, VCCI, RoHS, WEEE
Image Processing Motion Adaptive Deinterlacing – 1080i
Low Angle Interpolation
3D Comb Filter
DICOM Compliance
PIP/PbP Swapping
Monochrome SOG
Grayscale Mode

Service & Warranty

Warranty 2 Years on LCD, backlight, and electronics

Product Sheet

Download Printable PDF : 158 kb