5MP Color Display for Mammo and Tomo


Back To Categories > ,

FDA 510(k) Certified FOR MAMMOGRAPHY and TOMO

The C5MPn is a 5 mega-pixel high bright color LED backlit LCD offering front sensors for True DICOM gray level and luminance auto-calibration.  This LED is designed specifically for multi-modality imaging including Mammography and Tomosynthesis. Ideal for use with multi-modality imaging, including Mammography and Tomosynthesis, the DBMX50-LED gives you a clear, detailed image for ease in diagnosis. With its 5 mega-pixels of resolution and 14-bit processing, as well as front, back and ambient light sensors and high bright color LED backlit screen, the DBMX50-LED will exceed your needs for display clarity and image rendering.

Front sensors on each monitor provide True DICOM gray level and luminance auto-calibration so you’ll retain optimal visual clarity at all times. Paired with the included X-CAL® Client and Remote Administration DICOM Auto-Calibration Software, you can configure stand-alone workstations for auto-calibration or successfully monitor networked monitors for proper calibration. An admin will receive an alert if the monitor needs to be calibrated and can start the process remotely at any time, with additional alerts if calibration could not be completed.

Improve Diagnostic Capabilities

Your properly calibrated 5MP Color LED is easy to read, with built-in digital ambient light compensation and PrivateLite®, a private ambient reading light. No need to be directly in front of the monitor to review images as the screen provides a wide-angle range of 174 degrees both horizontally and vertically.

Connect the DBMX50-LED monitor to any system, using the integrated DVI and Display Ports. Power requirements are as little as 100W maximum for use and 2W when in power save mode — good for energy-sensitive offices. Each monitor comes with a 5-year warranty on the electronics, LCD and backlight and a 3-year warranty that covers the graphic controller. 510(k) certified by the FDA for mammography, the 5MP Color LED also includes the auto calibrations, visual tests, reports and documentation required for MQSA compliance. The monitor meets standards for ANSI/AAMI, FCC, IEC and C-Tick compliance. VESA standard mounting configurations are included, with other options available.

SKU: C5MPn DBI

Description

C5MPn-LED for Mammography and Tomosynthesis

 

Description 5 Mega-Pixel Color LCD with Fixed Front Sensors, Back light Sensor, and Ambient Light sensor for Mammography and Tomosynthesis
Screen Type LED Backlit LCD
Recommended Modalities CR, CT, DR, MR, Ultrasound, NucMed, PET, 3D, PACS, Mammography and Tomosynthesis
Diagonal Screen Size (inches) 21.3″
# of Pixels 5 Mega-Pixel
Resolution (pixels)
2048 x 2560 Portrait;
2560 x 2048 Landscape
Contrast Ratio (typical) 800:1
Viewing Angle 174 Degrees Horizontal and Vertical
Brightness 800 cd/m2; 420 cd/m2 ACR Recommended Calibrated brightness
Palette 14 Bit Graduation
Video Inputs DVI and Display Port
Dimensions H x W x D (inches) 20.5 x 15.4 x 9.8″
Weight with stand/base (lbs.) 24.3 Lbs
Power Supply External
Power Consumption (on/savings) 100W (Max) / 2W during Power Save
Compliance/Safety Standards UL60601-1, cUL2601-1, CE, IEC/EN60601-1, FCC Class B, VCC1, MIC, CCC, FDA 510(k)
Other Features Front Sensor for True Auto-Calibration, Client/remote Administration Calibration Software included, Rear Sensor for Backlight brightness control, Digital ambient Light Compensation, Complete Screen Luminance Uniformity Control, 14 Bit Processing for Precise Image Rendering, VESA Standard Mounting configuration, Other Mounting options available.

 

Service & Warranty

Service/Support 24/7
Warranty 5 years on the LCD, Electronics and Back light; 3 years on the graphic controller

Product Sheet

CX50n-led
Download Printable PDF : 743 kb